Sunday, 16 October 2016

TOYOTA LAND CRUISER 200 SERIES




We armor Land Cruisers to Protection level B4, B4+, B6 and B7 levels. All four sides of the passenger compartment and the roof of the vehicle are protected using high-quality (certified) armor steel and glass. The armoring is integrated inside the vehicle' cab and forms a complete self-supporting structure so as to avoid excessive stress on the vehicle's original structure. Doors are upgraded with Heavy-duty hinges and with in-built door-stop. Fuel-tank is protected with steel armor-plates. The battery and control module of the engine are protected to the same level as the opaque areas. Land Cruisers are available in various grades- GXR, VXR, GX and VX in both petrol and diesel variants.

VEHICLE SPECIFICATION



Base Vehicle: Toyota Land Cruiser 200-series GXR, 4WD, Ihd, new 


Engine:  4.6LV8 petrol DOHC 32-valve VVT-i


Output: 202kW/271HP@5,400rpm, 410Nm@3,400rpm


Cubic Capacity: 4,461 cc


Transmission: 5-speed Manual/Automatic


Seats: 8


Body Type: 5-Door Station Wagon

Fuel type: Petrol/Diesel-130l

Grade:  GXR

EXTERIOR

Ø  17 Inch Steel Wheels

Ø  Colored Bumpers

Ø  HID Headlamps with Headlamp Leveling

Ø  Rear Floor-Mounted Spare Wheel

Ø  Side Steps

Ø  Powered and Colored Door Mirrors

Ø  Colored Rear Bumper Step

INTERIOR


Ø  Auto Air Conditioner with left and right Independent Controls and Manual Rear Cooler

Ø  AM/FM Radio, Bluetooth and MP3-Compatibile 6CD changer with 6 Speakers

Ø  Driver and Front Passenger Airbags

Ø  Fabric Seats

Ø  4-Spoke Steering Wheel

Ø  Power Door Locking

Ø  ABS with Brake Assist and EBD

Ø  Smart Entry and Push Start

ARMORING MODIFICATION


All four sides of the passenger compartment and the roof of the vehicle are protected using high-quality armor steel and glass defeating 7.62x51mm M80 Nato Ball ammunition (U.S. NIJ level III, CEN level FB6/BR6) and 5.56x45 SS109 ammunition (CEN level FB5/BR5 and FB6/BR6) at 0° incidence (90° to the surface) and 10m range according to CEN1063 and CEN1522.

WINSHIELD


OEM Windshield is removed and replaced with NIJ/CEN/STANAG tested Multi-layered ballistic glass. It’s thickness range between 39mm to 80mm. All transparent areas are multi-layer and polycarbonate coated to protect against the following and all lesser weapons/ammunitions at 90° impact angle in accordance with the above specifications.

Ø  Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov

Ø  Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt

Ø  Calibre 7.62 x 51 mm, FJ/PB/SC, (FN "FAL"" / "LAR" NATO rifle

FLOOR


Floor of the vehicle is fitted with a blast protection to protect occupants against fragmentation from simultaneous detonation of 2 DM-51 German ordnance hand grenades or equivalent.

SUSPENSION AND BRAKING SYSTEM


Suspension and braking systems of the vehicle are assessed and are modified to support the added weight caused by the armor. Other armoring options for the vehicle are also installed at this time

OTHER MODIFICATION


Ø  Hinge mounting points are reinforced both in the pillars and in the doors in a way that the armouring of the door is supported by the armouring of the pillar.

Ø  Heavy-duty hinges with in-built door-stop.

Ø  Fuel-tank(s) protected with steel armour-plates.

Ø  The battery and control module of the engine are protected to the same level as the opaque areas.

Ø  Front fenders armored to protect against side impact bullets

Ø  Armor overlap at all doors to prevent penetration through door posts and pillars.

Ø  Armored louvered Radiator protection concealed behind hood of vehicle

Ø  Powered glass operations 4-6 inches if required

Ø  Customized tailpipe protection

ARMORING LEVELS



Level 4
Level 5
Level 6
Level 7
Windows Glass
Caliber Magnun 44
AK 47/G3/GAIL/FUSIL 5,56
7.62X51 Full Metal Jacket
7.62X51mm/ AP*, FJ, BP, HC1 (*Armor Piercing).
Ballistic Protection Aganist
18.6 mm Approx.
40 mm Approx.
46 mm aprox.
76 mm aprox.
Body Structure
ü    
ü   
ü   
ü   
bonnet (hood)
û   
û   
ü   
ü   
dash and console reinforcement
ü    
ü    
ü    
ü   
doors
ü   
ü   
ü    
ü   
electric system protection
ü    
ü   
Entire cap in ballistic steel
û   
ü   
ü    
ü   
Floor
ü   
ü   
ü   
ü   
floor covered with explosive wave dissipation and anti-fragmentation fibber
û    
ü   
ü   
ü   
fuel tank
ü    
ü   
ü   
ü   
main battery box
û   
ü   
ü   
ü   
panels' retainers
ü   
ü   
ü   
ü   
radiator full ballistic protection
û   
û   
ü   
ü   
reinforced front and back bumpers
ü   
ü   
ü   
roof
ü   
ü   
ü   
ü   
roof frame
ü   
ü   
ü   
ü   
sides
û   
ü   
ü   
ü   
Teflon tiers rings
ü   
ü   
ü   
ü   
tiers
ü    
ü   
ü    
ü   
two way 100 W intercom
û   
ü   
ü   
ü   
Average Added Weight
160 Kg
800 Kg
1050 KG
1400 KG













Note:
Ø  All electrical equipment standard to this vehicle shall be tested and modified as necessary to protect against the armoring process.

Ø  All gun ports are concealed, making it invisible from outside and maintains the original look of the vehicle.

Ø  The added weight may vary based on the type of vehicle.

Regards,
Sijo Micheal Johnson
Contact No: +971 555772487

No comments:

Post a Comment